Bit Sync/Frame Sync

Decommutator

PCM Simulator

FM Demodulator

Modulator/Calibrator

IF Demodulator

PCM Encoder

Telemetry Chassis

Telemetry Solutions

Software

---IF Tracking Demodulator

The Talon-PCI 70 MHz IF Tracking Receiver is a fully programmable DSP (Digital Signal Processing) based Tracking Receiver with on-board Multi-Mode Digital Demodulation designed around the PCI form factor. The DSP algorithms are implemented in state-of-the-art FPGAs (Field Programmable Gate Arrays) allowing for rapid enhancements or customization. Receiver versions for IF frequencies from 10 to 130 MHz are also available, consult factory for details.

Capable of accepting input signals in the standard configuration from 65 MHz to 75 MHz, the Talon will RF receive, condition, and digitally demodulate FM or FSK data. The IF Bandwidth is programmable from 20 kHz to 5 MHz . The AFC (auto frequency control) IF Tracking feature compensates for Doppler shift and other transmitter anomalies by using DSP algorithms to determine if the input spectrum is centered at the programmed center frequency. If the input spectrum is not symmetrical, the digital downconverter is automatically stepped to track the input frequency. Using these DSP algorithms and other programmable features make the Talon-PCI a key element of any Telemetry or Satellite Communications ground station.

Datasheet

Manual

TalonPCI Software

Features:
  • User friendly Windows based setup and operation
  • Program selectable for FM, PM, or BPSK demodulator coding
  • Programmable from 20 kHz - 5 MHz IF Data Bandwidth
  • Standard Input IF Frequencies from 65 to 75 MHz, versions available from 10 MHz to 130 MHz with a 10 MHz range
  • PCI form factor
  • High Input Dynamic Range of -70 to -10 dBm for Standard IF
  • High speed transfer of the output data to PCI bus for FFT analysis
  • IF Tracking feature compensates for Doppler effect and other transmitter anomalies
  • Analog reconstructed data is available on BNC connectors for easy user interface
  • Fully programmable digital FIR output filter can be bypassed for higher PCM data rates
  • User selectable output filter characteristics for analog or digital output data
  • Digitally time synchronized sampled output data available for FFT analysis
  • 1 KHz Input Frequency Tuning Resolution
  • Two program selectable IF inputs
  • AM and Level AGC testpoints available for antenna tracking on BNC outputs

© Copyright 2008 Ulyssix Technologies, Inc. -- Last Updated: Aug. 26 2009